Infinity Dock Series – means an infinite selection of layouts

Infinity Dock Series- Don’t be afraid of Change – It’s Fun!

Everyone likes a little change in their life.  When driving from point A to point B, don’t be afraid to change your route.  Take a different road to see some different scenery.  Stop by a landmark on the side of the road to learn something new.  Stop at a roadside stand and get fresh vegetables OR change your dock layout with the Infinity Dock Series from ShoreMaster.  It’s fun!!

1

A straight dock is simple and functional – but it can be boring also.  Use your imagination.Why should your dock be any different?  When you have the RS 4 Infinity Series you don’t need to be afraid of change.  It is named “Infinity Series” because of the infinite number of configurations you can have and the flexibility it provides.  Your only limitation is what you can dream up. It’s all possible with the Infinity Series from ShoreMaster.  Use your imagination.2

When you own a lake home, friends and family LOVE to come to visit. If given the opportunity, people will congregate on the dock because it is a focal point of your place.

 

                       NEW JET SKI?

3.Purchased a new Jet Ski or boat?  Maybe its time to change your dock configuration to accommodate the new equipment. With the RS 4 Infinity series from ShoreMaster you can purchase some 45° and 90° angled dock sections and completely redesign the layout.

 

                              LOW WATER?

Water low this year?   Change the configuration again and move the extra sections to the end of the dock to get the extra length you need.

Last one

WHAT MAKES THE INFINITY DOCK SERIES SO UNIQUE?

The 45° and 90° angles really make the dock look sharp with their rounded corners.  These are not pricey “custom made” sections that cost a fortune to own – they are standard pieces – and they’re waiting for you to configure them the way you want.

The platform at the end acts as a great relaxation area. The dock furniture makes you feel like you’re sitting out on water. You can have vertical dock bumpers at the end for when friends want to come over to visit.

                                              FLEXIBILITY

The RS 4 dock will provide you with the flexibility to add-on as needed. You are not limited to one configuration. By redesigning the layout, you truly can come up with many different designs to suit your needs and varying lake conditions each summer. Start simple, and then over the course of several seasons you can add-on piece by piece. The RS 4 dock gives you the flexibility to do that.

 If you get the itch, it’s fun knowing that you are only limited by your own creativity.  CREATE AWAY!!

NoteAll of the RS 4 docks shown here are year-to-year changes of the SAME dock.

Found this article helpful?  Call Jerry at 920-493-4404 or Email Jerry@wisconsinpws.com for more information.  Also go to “NEWS” on any page of our website for a complete list of articles meant to keep you informed on the latest product information and maintenance issues.


Welded Boat Lift Frames Vs Bolted Together Bolt Lifts

A Welded Boat Lift – 5 Reasons Why it’s Superior to Bolted Lifts

 

ShoreMaster Trust Quality Welds

Quality starts with state of the art welding

 

 

Welded Boat Lift frames are better than a bolt-together lift frame and there are at least 5 reasons for that. Most of them center around the reduced maintenance superior strength and durability of welded docks and lifts.

 

 

 

 

Less Maintenance

You’re going to spend good money when you buy a boat lift.  Why would you want to spend a weekend checking and tightening all of the nuts and bolts on your boat lift just to make sure everything was tight?  We’re pretty sure you don’t.  In that case, we strongly suggest that you purchase a high-quality welded boat lift or dock from ShoreMaster. ShoreMaster welded boat lifts and docks keep you from spending your summer tightening up nuts and bolts after a storm or windy day. Welded boat lifts and docks save you time because they require less maintenance.

Welded Boat Lift Frames Stay True and Square 

A bolt together boat lift will eventually become loose due to normal use and prolonged periods of heavy waves crashing into the frame.  Corrosion of the hardware accelerates this process. If you neglect to tighten a loose bolt on your boat lift, other parts of the boat lift such as the cables, pulleys, winch, or other components can wear prematurely.  This will cause failure of not just one part but several parts at the same time. This can be costly to repair.  It also can make it extremely difficult for you to discover the original source of the failure.

A Welded Boat Lift Canopy Frame Can Save You Hours During Assembly

When it comes to assembling a dock, boat lift, or boat lift canopy, you’ll be glad that you choose a welded product over a bolt together product. Welded products typically take far less time to assemble than a bolt together product. Consider for a moment the assembly of ShoreMaster’s canopy frame can be completed by just one person in as little as 30 minutes because the canopy frame includes just four welded components; two canopy ends and two canopy sides. Other manufacturers may have dozens of components that need to be bolted together.

Bolt Together Boat Lifts Make It Easier To Replace Damaged Parts, But You May Be Less Likely to Need To Replace Parts With A Welded Dock or Lift

That’s right! It is easier to replace parts on a bolt-together dock or lift. This looks like a benefit until you realize it is also more likely that most dock and boat lift parts can become bent and damaged simply by forgetting to tighten a loose bolt on your bolt-together dock or lift.  The ShoreMaster welded docks and lifts do not require replacement of frame parts caused by unusual wear due to loose, missing, or corroded welds. The same can’t be said of bolt-together docks and lifts.

A Welded Boat Lift Offers Higher Resale Value

Because welds are permanent and require no maintenance, you will find that your welded-together dock and lift is more valuable at resale time.  Welds will not rust or corrode like hardware. Potential buyers will be wary of the impending costs to replace worn out or corroded hardware.

Found this article helpful?  Call Jerry at 920-493-4404 or Email Jerry@wisconsinpws.com for more information.  Also go to “NEWS” on any page of our website for a complete list of articles meant to keep you informed on the latest product information and maintenance issues.