Sep 8, 2020
Vinyl Bunks Are A Better Value.
Vinyl bunks are a much better value than carpeted bunks. You bought your boat to enjoy yourself – not replace worn-out carpeting on the weekend.
Many boat and PWC lifts utilize carpeted bunks to support the vessel. These are an economical option and provide sufficient support for your boat or PWC (personal watercraft).
Vinyl Bunks
However, over time, the carpet on wood bunks becomes worn or frayed. This situation can create contact between the hull of the boat and the raw wood. Besides, sand and debris could be lodged in the carpet fabric. The sand will grind against the hull of the watercraft. It goes without saying this is not a condition you want. Any loose or frayed carpet should be replaced to prevent potential trip hazards too.
Do your carpeted boat bunks need replacement again this year? Vinyl bunks never require replacement.
Vinyl boat bunks may cost more than carpeted bunks initially but they are a better value over time.
When should the bunks be inspected?
Spring & Fall are excellent times to inspect the wood structure of the carpeted wood bunks. Wood, being a natural material, can become warped, cracked, or rotten. If you find any soft spots or warping of the wood material, replace the bunk before using it.
For more information on checking & servicing your lift, see https://wisconsinpws.com/lift-cable-maintenance/
Perhaps you’ve purchased a new PWC or boat and want the best bunk for your new purchase, consider ShoreMaster vinyl boat bunks.
Vinyl boat bunks have a strong history.
ShoreMaster has used vinyl boat bunks for boats, PWC’s and pontoons for decades. The vinyl bunks will save you money in the long run because the aluminum channel will never rot or warp like wood. Plus, the vinyl never requires replacement like carpeting does. You’ll also save money and frustration because the vinyl material is less prone to wear than carpet,
Put simply; vinyl boat bunks are far more durable than carpeted bunks. The vinyl material used on ShoreMaster‘s vinyl boat bunks does not promote the adhesion of sand, and debris like carpet can, which means your boat or PWC will stay cleaner, longer.
What about Vinyl boat bunks vs. Cradles?
Full-length vinyl boat bunks offer greater support than cradles. A much longer area is supported. The weight of your watercraft is distributed along the bunk’s length to prevent pressure points where your hull contacts the supports. When you have a choice between cradles, carpeted bunks, and vinyl bunks, you are better off in the long run with the vinyl boat bunks. When it comes to the total cost of ownership and resale value, vinyl boat bunks are the best value.
Vinyl boat bunks are available for all ShoreMaster boat lifts. If you are considering repairing a set of carpeted wood bunks, it may be wise to upgrade to vinyl bunks once and for all.
Always Remember:
Pier & Waterfront Solutions (PWS) specializes in all ShoreMaster accessories for docks and lifts. We are located in the center of Door County at 7325 St Hwy 57 south of Sturgeon Bay at the intersection of Idlewild Road. Our staff looks forward to serving all of your waterfront needs.
In Conclusion
The continued introduction of refinements keeps Shoremaster at the top of the best-in-class list.
Tell Your Friends & Family
Have friends or neighbors you believe should see this article? Email a link to this article – and Thank you!
You can visit Pier & Waterfront Solutions on Facebook also.
Don’t Forget – PWS is the expert when you have a waterfront question!
ARE WE OPEN?
Pier & Waterfront Solutions has remained “open.”
While all this is going on, we are working to maintain the trusted service you expect. That’s important to us.
We are conducting as much business as possible by email, text, or phone. Site visits will continue as usual. When in-person contacts are necessary, we follow “social distancing” guidelines as closely as possible.
Call, message, or use this simple request form to get answers and quotes.
Thank you for allowing us to work with you – safely.
Let’s all stay safe!
Aug 11, 2020
Stress – Even Boat Lifts experience it
Stress – Even boat lifts are under stress – this year more than ever before due to the high waters.
Why? High water increases the stress on your cables.
We’ve previously informed you of the danger to boat lift cables during a storm. If the waves hit the bottom of your boat it will momentarily lift the boat and then allow it to fall back on the rack. What if the cables are weakened by rust and frays? The “bouncing” effect can completely sever a cable into two pieces.
The boat only lifts a fraction of an inch – right?!!
How can that movement harm the cables?
Even though the boat only rises a fraction of an inch, the energy of the “falling” boat must be absorbed by the boat rack. The cables in each corner of the lift must, in turn, absorb the stress of a moving 3-5,000 pound boat.
Having said that, a weakened cable is in imminent danger of breaking. Think of an 80-100 lb jackhammer used to break up concrete. Even reinforced concrete can not withstand the movement of the bit hitting the concrete.
With a boat, you are talking about a potential 5,000 lb weight dropping on a rack compared to an 80-100 lb. weight.
Protect your cables! It only takes a minute or two to protect your cables from rust. It’s simple and easy to do. A convenient link* is provided below so you can learn more about this.
What are the defect warning signs?
There are warning signs of defects in your cables? If your cables look like any of these, it’s time to replace them. Need more information? Here’s an article that addresses this issue.
Always remember – it is possible to have broken strands inside your cable without any exterior signs of damage. This situation is especially true on stainless steel cables which do not rust.
What’s a quick way to reduce the stress on the cables?
At the beginning of the year, we place your boat lift in the requested location. We adjust the height of the legs based on what the current water level is.
Unfortunately, the water has continued to rise this year and that may no longer be suitable for the conditions you have today. Add to this the Seiche waves (pronounced “say-sh”) which are standing waves that form in a confined body of water. The friction of the wind against the surface of the water causes wave action.
As waves move towards the shoreline the water gets shallower and the moving waves rise higher. Standing waves, in general, can form in any type of semi-enclosed or enclosed body of water. When these rising waves hit the bottom of your boat the boat does what it is designed to do – it floats on the water.
Your Lift rack may be too close
The lift rack could be too close to the water to protect your boat with the rising water. As a result, you are not able to raise the boat high enough to keep it above the waves. On the other hand, If the rack is set too high in the water, you may not be able to get your boat on the lift. It’s a delicate balance. The variable is the changing depth of the water.
What can I do?
One way to raise the boat higher is to purchase longer legs and replace the standard lengths with new ones.
A less costly alternative is to simply move your lift closer to shore. It will be in shallower water and save you having to buy longer legs and the labor to install them.
If you keep the standard legs and don’t allow us to place the lift closer to the shore, you are inviting costly repairs or even replacements.
In Conclusion
Get out there and take care of those cables. Check out the link below. Then, consider moving the lift closer to shore.
* Wire Rope Lubrication link.
Tell Your Friends & Family
Have friends or neighbors you believe should see this article? Email them a link to this article – and Thank you!
You can visit Pier & Waterfront Solutions on Facebook also.
Don’t Forget – PWS is the expert when you have a waterfront problem!
Where is Pier & Waterfront Solutions?
Located at 7325 St. Hwy 57, we are about 3 miles south of Sturgeon Bay, and 1 mile past the intersection of Cty MM (heading north). Look for the intersection of Idlewild Road and Hwy 57.
ARE WE OPEN?
Pier & Waterfront Solutions has remained “open.” We have implemented measures to ensure the safety of our employees and visitors. As of Aug 1st, Wisconsin mandates the use of face masks. We also endorse this to slow the spread of Covid-19. It’s the only known method to control the spread at this time.
While all this is going on, we are working to maintain the trusted service you expect. That’s important to us.
We are conducting as much business as possible by email, text, or phone. Site visits will continue as usual. When in-person contacts are necessary, we follow “social distancing” guidelines as closely as possible.
When can I see the display yard?
Our display yard is always open for you to examine at your leisure. All displays have a numbered, red tag on them. If you want more information or pricing, please reference that number.
How will I get my estimate?
We provide estimates and invoices by email to make the process paperless and faster. With these measures, we hope everyone will stay safe, and we will be back to normal operations soon.
What can YOU do to help our crews?
Please conduct as much business as possible via emails, messaging, and emails. When you see our crews working in your area, please practice “social distancing.”
Call, message, or use this simple request form to get answers and quotes.
Thank you for allowing us to work with you – safely.
Let’s all stay safe!
May 14, 2020
USED BOAT LIFT GUIDE – Part 2
Are you thinking about buying a used boat lift? This two-part series concludes with four additional items to check. Upon completion, we will have guided you through eight problems to look for when buying a used boat lift.
See Part 1 for the first four checks.
Here’s the second list of things to check:
- Does the cable wind smoothly and correctly on the winch?
- Do the cables have rust on them? Does it use galvanized or stainless steel cables?
- Are there any “kinks” or other visible problems on the cable?
- How often were they lubricated, and with what lubricant?
Does the cable wind smoothly around the winch?
Properly wound Boat lift cable
If you look up inside the winch housing, if it has an enclosure, you will be able to see how the cables are winding. It should be a smooth pattern without any “crossed” cables. If the winch has no outer covering, you can readily see the pattern.
The wire cable has a “memory” to it. Once the cable gets crossed, it will tend to do it again the next time the cable rewinds.
Typical Cable Stacking
If the cable is wrapping in layers, you will get a thunderous sound when the cable finally “falls off” the stack. This movement scrapes the galvanizing of the wire, and rust will form. The “shock” of dropping a 2,000# (or more) weight will also apply excessive stress on the cables.
Do the cables have rust on them?
Galvanized cables will rust over time. The movement of individual strands of the wire against each other cause rust. This movement occurs as they wrap around the winch and pulleys. There is no way to end this.
The only thing you can do is lubricate the cables. The lubrication reduces the friction between individual strands. Lubrication, in turn, lengthens the life of the cable. For more details click HERE.
Rust on the cable indicates that some galvanizing has worn off. Individual wire strands are compromised.
What about rust on a stainless steel cable?
Stainless steel does not rust, but it does pick up loose rust from the winch. Winches are plain steel with a painted surface. When the paint rubs off, the steel will rust and “bleed” onto the cable.
It’s much like a scratch on a car. The rust will run down the side of the vehicle.
The rust typically appears near the winch when the rack is in a lowered position. Under these circumstances, it’s ok. Try to lubricate the cables every year to slow this down.
Are there any visible signs of problems with the cables?
We recommend you lower the “rack” down, but DO NOT allow “slack” to form in the cables. Slack in the cables will allow the windings at the winch to unwind and cross over each other.
It’s much like a fishing reel getting snagged when there is no tension on the line.
Are the cables on the used boat lift adjusted equally?
If three of the four corner cables appear “tight,” the cables will need re-adjustment to re-distribute the weight equally.
Even proper positioning of the boat is essential.
If it takes excessive weight to lower the rack, look at the pulleys in each corner. Are they free to move? Is there sand, seaweed, or reeds packed around the pulleys? Remove any debris to free up the rack.
If any pulleys resist rotation, the rack will not lower smoothly. You must find out why the rack is not moving.
Note: In the case of jet ski lifts, the weight of the rack may not be enough to cause the rack to lower by itself. Have someone lean of the back of the lift to assist the rack in lowering. Still, hanging up? Check all the pulleys as above.
Check the fittings on the ends of the cable. Has rust formed on the fittings, or are there broken strands?
Caution– watch out for the ends of the cables. It’s a painful reminder of exposed strands.
Examine the entire length of the cable for frays (broken strands).
Caution – DO NOT run your hand up and down the cable without leather gloves. Broken strands on the cable will cause painful cuts on an unprotected hand. Ordinary cloth gloves will not protect your hand.
Are there any “kinks” or other visible problems?
Here are the warning signs of defects in your cables.
Frayed Boat Lift Cable
Broken cable strands
Cable damage
wire rope damage
If your cable looks like any of these, it’s time to replace them.
Warning – it is possible to have broken strands inside a cable without any exterior signs of damage. This situation is especially true on stainless steel cables which do not rust.
Read this article to learn how to lubricate cables. Lubrication slows down premature corrosion. It’s simple and easy to do.
What is the proper lift cable maintenance?
Cable replacement requires a visual inspection of the lift cables. It’s best to inspect it while it is on dry land to check the critical points. Ideally, the lifting platform (or rack) should be in the lowered position. Of course, make sure the lift cable is not allowed to go slack.
Examine the vertical length of the cable for frayed wires, especially near the winch. Excessive fraying or corrosion near the winch is a top signal of damage.
CAUTION – Always wear leather gloves when sliding your hands along the cable. A frayed wire can cause painful damage to unprotected hands.
There are two types of cable wear:
- Internal cable abrasion- Occurs whenever strands work against each other under load.
- External abrasion – Occurs when the cable bends around the winch drum or against the side of the drum.
Every time the boat is raised or lowered, there is internal wear on the cable. Each strand of wire in the winding is moving at a slightly different speed. Abrasion of the cable strands is the result. When the strands break, they lose strength.
Assuming the cable is well cared for, how long should it last?
Experts say that to be safe- replace a galvanized cable every two years. All things being equal, the stainless cable will last longer. Up to 2X as long.
A point often overlooked – internal abrasion and rust are hidden, and there may be no visible damage. A boat lift cable like this will fail without prior warning.
When in doubt, plan on replacing the cables. Trying to squeeze another year out of a $75 cable isn’t worth the risk of dropping your boat or personal injury.
PWS handles Shoremaster cables and can provide new cables for all brands.
Nothing lasts forever – even boat lift cables.
Don’t Forget – Considering rip-rap for your shoreline? PWS is the place to contact!
Where is Pier & Waterfront Solutions?
Located at 7325 St. Hwy 57, it’s 3 miles south of Sturgeon Bay, and 1 mile past the intersection of Cty MM (heading north). Look on the right side, one mile north, at the next intersection (Idlewild Road and Hwy 57).
ARE WE OPEN?
During this time of uncertainty, Pier & Waterfront Solutions is staying “open.” We have implemented measures to ensure the safety of our employees and visitors. At the same time, we are working to maintain the trusted service that you have come to expect.
We are implementing these precautionary measures:
1. Conducting as much business as possible by email, text, or phone.
2. Site visits will continue but with limited in-person meetings. When in-person contacts are necessary, we will follow “social distancing” guidelines.
3. Our display yard is always open for you to examine at your leisure. All displays have a numbered, red tag on them. If you want more information or pricing, please reference that number.
Is there More?
4. Some employees will be working remotely, but they are always available by phone.
5. Any employee with symptoms or illness is sent home.
6. We continue to provide estimates and invoices by email to make the process paperless.
7. Crew starting times are being staggered to limit social interactions.
8. We keep the same crews together to limit cross interactions.
With these measures, we hope everyone will stay safe, and we will be back to normal operations soon.
What can you do to help us?
1. Please conduct as much business as possible via emails, messaging, and emails. This step protects everyone involved.
2. When you see our crews installing equipment, please practice “social distancing.”
Thank you for allowing us to work with you.
So – YES – ARE WE OPEN?
Please call, message, or email us with any questions.
Let’s all stay safe!
Contact:
Jerry @ (920) 493-4404 or Jerry@wisconsinpws.com – Commercial work & new/used Sales.
Dave @ (920) 905-2588 or Dave@wisconsinpws.com – Erosion control & shoreline work.
John @ (920) 493-4405 or John@wisconsinpws.com – Scheduling & Service work
May 7, 2020
17 STEPS TO PREPARE FOR SUMMER
Summer is almost here. Are you Ready?
Summer activities officially start with Memorial Day. In 2020 this may be delayed for many people. Even so, it’s approaching fast.
Memorial Day means a lot of outdoor activities will be starting. Many people will head to the lake for fun and relaxation. To truly enjoy the rest of the season, you have to ask yourself, “Is my place ready for summer”?
Many people have time on their hands this year, so why not use it to get ready for summer? That way, you can enjoy getting outside and have some real fun on the water.
Be Ready for Summer Activities
Here’s a quick checklist to help make sure you are ready for the season. Many people have time on your hands this year, so why not use it to get ready for summer?
Summer Startup Checklist:
- Have your air conditioner checked and serviced if needed.
- Inspect, sweep, and power wash your decking & porch. For more information – see link.
- Touch up stains and paints as needed.
- Prep your lawn. You may need to give the yard a thorough mowing.
- Rake up any leftover leaves and debris so that a lush green grass can thrive.
- Get out the rake and clean up any debris on your shore. Watch for glass and sharp objects that washed up over the winter. They can completely take the fun out of your summer.
- Clean the grill, fill the propane tanks, or stock up on charcoal and lighter fluid. You want to make sure you have everything ready for that first barbeque.
- Test all smoke and carbon monoxide detectors. Test these every six months. If you don’t have detectors or fire extinguishers, be sure to get some. Unlike living in the city, many lakefront communities have only volunteer fire departments. Response times may not be as quick as in the city, and fire only needs time to get totally out of control.
WHAT ELSE NEEDS TO BE DONE?
- If the furnace has not been operating over the winter, now is an excellent time to make sure it is working correctly. You’ll need it for those early morning chills.
- Look over the screens on the windows and doors. Repair any holes or replace them as needed. No one wants to leave an invitation for the bugs to enter the house.
- Clean your boat and PWC and any other “toys.” Check all fluid levels, inspect the hull, test electronics, give it a thorough cleaning.
- Check all anchor ropes. Are they cut or rotting?
- Be sure to check the trailer and lights. Nothing is more aggravating than following a vehicle with faulty lights.
- Have you checked the batteries? Is it time for a new one?
- Be sure to stock the cabinets. Are there snacks, hamburgers, chips, hot dogs, buns, along with beverages and lots of s’mores. They’re great for outdoor grills and campfires.
- Plant new flowers to add more beauty and color to your yard.
- Check your dock and the cables on your jet ski and boat lifts. Have them changed before they go into the water. For more information, follow this link; and
Most important of all …ENJOY A SAFE SUMMER!
Tell Your Friends & Family
Have friends or neighbors you believe should see this article? Email them this link – and Thank you!
Where is Pier & Waterfront Solutions?
Located at 7325 St. Hwy 57, it’s 3 miles south of Sturgeon Bay, and 1 mile past the intersection of Cty MM (heading north). Look on the right side, one mile north, at the next intersection (Idlewild Road and Hwy 57).
ARE WE OPEN?
During this time of uncertainty, Pier & Waterfront Solutions is staying “open.” We have implemented measures to ensure the safety of our employees and visitors. At the same time, we are working to maintain the trusted service that you have come to expect.
We are implementing these precautionary measures:
1. Conducting as much business as possible by email, text, or phone.
2. Site visits will continue but with limited in-person meetings. When in-person contacts are necessary, we will follow “social distancing” guidelines.
3. Our display yard is always open for you to examine at your leisure. All displays have a numbered, red tag on them. If you want more information or pricing, please reference that number.
Is there More?
4. Some employees will be working remotely, but they are always available by phone.
5. Any employee with symptoms or illness is sent home.
6. We continue to provide estimates and invoices by email to make the process paperless.
7. Crew starting times are being staggered to limit social interactions.
8. We keep the same crews together to limit cross interactions.
With these measures, we hope everyone will stay safe, and we will be back to normal operations soon.
What can you do to help us?
1. Please conduct as much business as possible via emails, messaging, and emails. This step protects everyone involved.
2. When you see our crews installing equipment, please practice “social distancing.”
Thank you for allowing us to work with you.
So – YES – WE ARE OPEN?
Please call, message, or email us with any questions.
Let’s all stay safe!
Contact:
Jerry @ (920) 493-4404 or Jerry@wisconsinpws.com – Commercial work & new/used Sales.
Dave @ (920) 905-2588 or Dave@wisconsinpws.com – Erosion control & shoreline work.
John @ (920) 493-4405 or John@wisconsinpws.com – Scheduling & Service work
Jan 21, 2020
Pier & Waterfront Solutions
When Pier & Waterfront Solutions (PWS) began in 2015, the founders never expected the strong response they have received for their efforts. They made a substantial initial investment in equipment and personnel. This investment had been based on extensive prior experience. They resolved not to make the same mistakes that other businesses had made.
Customer needs were to come before profits. It’s been a philosophy they follow to this day. The business demand has grown accordingly.
What are some examples?
As an example, as the business grew, they quickly realized that more equipment and crews to man the equipment were needed. In 2017 and again in 2018, they added the second and third machines and the crews to operate them.
Announcing ……….
This year, PWS purchased their FOURTH machine to handle the growing demand. But wait, that’s not all.
Despite the labor shortage in Door County, an additional hand install crew is in the works for 2020 also. This investment is to keep up with the market for our services.
How has PWS been received? Read our customer testimonials. These are actual notes we have received from our customers and printed here word-for-word.
Now it’s time for more changes.
What about our erosion control systems?
In the January 7th article, we also introduced you to our expanded shoreline erosion & rip-rap systems. In an attempt to preserve as much shoreline as possible from erosion, work continues into the winter months with the favorable weather.
Here are some more examples of the work that we completed this year.
BEFORE
Shoreline restitution – AFTER
BEFORE AFTER
Preventing shoreline erosion
MORE EXCITING NEWS – that’s not all of the changes coming for 2020! Follow this link for our next announcement.
Don’t Forget
Pier & Waterfront Solutions (PWS) specializes in ShoreMaster docks, lifts, accessories, and now, shoreline erosion control and waterfront work!
Located at 7325 St. Hwy 57, just south of Sturgeon Bay, PWS can be found at the intersection of Idlewild Road and Hwy 57. Our staff looks forward to serving all of your waterfront needs.
Contact Dave @ (920) 905-2588 or Email Dave@wisconsinpws.com for information about erosion control.
Jerry @ (920) 493-4404 or Email Jerry@wisconsinpws.com for information about New & Used Sales.
John @ (920) 493- 4405 or Email John@wisconsinpws.com for Scheduling.
