May 19, 2020
The Best Boat Dock Decking in Door County
Boat dock decking is no longer a simple piece of wood laid on other pieces of wood. There are many types of materials used on piers and boat docks today.
Today’s options include open-deck plastic, solid plastic boards, aluminum, wood, and various composites.
What’s the most popular decking used today, and why?
Today, wise shoppers choose plastic with the open-deck configuration.
Why?
It’s simple. The best type of decking is a plastic deck. Today’s plastic holds it’s original color (within 3%). It also keeps it’s shape better. Plastics need less maintenance than any of the other types of decking.
Plastic decking requires no staining or painting. The surface does not flake or wear-off, nor does it lose its color with exposure to the UV rays.
Open-decking helps resist the growth of mold and mildew far better than wood or even another plastic deck. Plastic stays cool in the summer, repels rain and dries quickly. About 90% of the moisture runs off immediately while the rest simply evaporates.
What about other types of plastic boat dock decking?
If you are referring to the wood and resin-impregnated boards, over time, the wood fibers swell. The moisture can attract mold and mildew.
How about recycled plastic boards with no fiber in it?
Typical Plank decking
The recycled boards come with their unique problems.
If stored in shaded areas, HDPE plastic boards cannot escape the mold/mildew cycle. See how the mold/mildew cycle develops HERE.
What’s the most important thing about decking?
Recycled decking is an extruded board. That means, when cresting waves hit the bottom of the dock, there is no release for the energy waves produce. The bolted-down boards keep the decking from washing away. But this creates a virtual “solid” surface for the wave’s energy to push against. The frame structure must take all the energy from the wave.
How can you prove this?
Look at a dock that flipped over during a storm. You will notice that the legs bent in the direction that the storm originated.
Solid boards with a 1/2″ gap every 6″ does not relieve the pressure from the waves.
The result is the upward pressure from the waves lifted the pier high enough for it to move sideways. The legs were no longer vertical. They came down at an angle, and the legs bent. The continuing pressure from the waves then pushed the dock over.
Plastic is plastic – isn’t it?
Yes, they are all oil derivatives. But, there are many types of plastic made today. Some are super hard and act as “bearing surfaces,” while others are very pliable.
In general, plastics will outlive us. The shape and surface area of the plastic makes a big difference when it comes to decking.
How do you relieve the upward energy?
The only way to relieve the pressure on the boat dock decking is to provide enough open areas for the wave energy to pass through. 42% open area is the standard today.
At this percentage, almost one-half of the wave energy passes through the decking. The wave is less likely to lift the dock. Yet the decking is strong enough to walk on.
If you combine the most massive steel frame in Door County along with an open deck,
you get the PWS 3-Season Pier.
Don’t Forget – Considering rip-rap for your shoreline? PWS is the place to contact!
Where is Pier & Waterfront Solutions?
Located at 7325 St. Hwy 57, it’s 3 miles south of Sturgeon Bay, and 1 mile past the intersection of Cty MM (heading north). Look on the right side, one mile north, at the next intersection (Idlewild Road and Hwy 57).
ARE WE OPEN?
During this time of uncertainty, Pier & Waterfront Solutions is staying “open.” We have implemented measures to ensure the safety of our employees and visitors. At the same time, we are working to maintain the trusted service that you have come to expect.
We are implementing these precautionary measures:
1. Conducting as much business as possible by email, text, or phone.
2. Site visits will continue but with limited in-person meetings. When in-person contacts are necessary, we will follow “social distancing” guidelines.
3. Our display yard is always open for you to examine at your leisure. All displays have a numbered, red tag on them. If you want more information or pricing, please reference that number.
4. Some employees are working remotely, but they are always available by phone.
5. Any employee exhibiting symptoms or illness is sent home.
6. We continue to provide estimates and invoices by email to make the process paperless and faster.
7. Crew starting times are being staggered to limit social interactions.
8. We keep the same crews together to limit cross interactions.
With these measures, we hope everyone will stay safe, and we will be back to normal operations soon.
What can YOU do to help us?
1. Please conduct as much business as possible via emails, messaging, and emails. This step protects everyone involved.
2. When you see our crews installing equipment, please practice “social distancing.”
So, YES – WE ARE OPEN!
Thank you for allowing us to work with you.
Please call, message, or email us with any questions.
Let’s all stay safe!
May 14, 2020
USED BOAT LIFT GUIDE – Part 2
Are you thinking about buying a used boat lift? This two-part series concludes with four additional items to check. Upon completion, we will have guided you through eight problems to look for when buying a used boat lift.
See Part 1 for the first four checks.
Here’s the second list of things to check:
- Does the cable wind smoothly and correctly on the winch?
- Do the cables have rust on them? Does it use galvanized or stainless steel cables?
- Are there any “kinks” or other visible problems on the cable?
- How often were they lubricated, and with what lubricant?
Does the cable wind smoothly around the winch?
Properly wound Boat lift cable
If you look up inside the winch housing, if it has an enclosure, you will be able to see how the cables are winding. It should be a smooth pattern without any “crossed” cables. If the winch has no outer covering, you can readily see the pattern.
The wire cable has a “memory” to it. Once the cable gets crossed, it will tend to do it again the next time the cable rewinds.
Typical Cable Stacking
If the cable is wrapping in layers, you will get a thunderous sound when the cable finally “falls off” the stack. This movement scrapes the galvanizing of the wire, and rust will form. The “shock” of dropping a 2,000# (or more) weight will also apply excessive stress on the cables.
Do the cables have rust on them?
Galvanized cables will rust over time. The movement of individual strands of the wire against each other cause rust. This movement occurs as they wrap around the winch and pulleys. There is no way to end this.
The only thing you can do is lubricate the cables. The lubrication reduces the friction between individual strands. Lubrication, in turn, lengthens the life of the cable. For more details click HERE.
Rust on the cable indicates that some galvanizing has worn off. Individual wire strands are compromised.
What about rust on a stainless steel cable?
Stainless steel does not rust, but it does pick up loose rust from the winch. Winches are plain steel with a painted surface. When the paint rubs off, the steel will rust and “bleed” onto the cable.
It’s much like a scratch on a car. The rust will run down the side of the vehicle.
The rust typically appears near the winch when the rack is in a lowered position. Under these circumstances, it’s ok. Try to lubricate the cables every year to slow this down.
Are there any visible signs of problems with the cables?
We recommend you lower the “rack” down, but DO NOT allow “slack” to form in the cables. Slack in the cables will allow the windings at the winch to unwind and cross over each other.
It’s much like a fishing reel getting snagged when there is no tension on the line.
Are the cables on the used boat lift adjusted equally?
If three of the four corner cables appear “tight,” the cables will need re-adjustment to re-distribute the weight equally.
Even proper positioning of the boat is essential.
If it takes excessive weight to lower the rack, look at the pulleys in each corner. Are they free to move? Is there sand, seaweed, or reeds packed around the pulleys? Remove any debris to free up the rack.
If any pulleys resist rotation, the rack will not lower smoothly. You must find out why the rack is not moving.
Note: In the case of jet ski lifts, the weight of the rack may not be enough to cause the rack to lower by itself. Have someone lean of the back of the lift to assist the rack in lowering. Still, hanging up? Check all the pulleys as above.
Check the fittings on the ends of the cable. Has rust formed on the fittings, or are there broken strands?
Caution– watch out for the ends of the cables. It’s a painful reminder of exposed strands.
Examine the entire length of the cable for frays (broken strands).
Caution – DO NOT run your hand up and down the cable without leather gloves. Broken strands on the cable will cause painful cuts on an unprotected hand. Ordinary cloth gloves will not protect your hand.
Are there any “kinks” or other visible problems?
Here are the warning signs of defects in your cables.
Frayed Boat Lift Cable
Broken cable strands
Cable damage
wire rope damage
If your cable looks like any of these, it’s time to replace them.
Warning – it is possible to have broken strands inside a cable without any exterior signs of damage. This situation is especially true on stainless steel cables which do not rust.
Read this article to learn how to lubricate cables. Lubrication slows down premature corrosion. It’s simple and easy to do.
What is the proper lift cable maintenance?
Cable replacement requires a visual inspection of the lift cables. It’s best to inspect it while it is on dry land to check the critical points. Ideally, the lifting platform (or rack) should be in the lowered position. Of course, make sure the lift cable is not allowed to go slack.
Examine the vertical length of the cable for frayed wires, especially near the winch. Excessive fraying or corrosion near the winch is a top signal of damage.
CAUTION – Always wear leather gloves when sliding your hands along the cable. A frayed wire can cause painful damage to unprotected hands.
There are two types of cable wear:
- Internal cable abrasion- Occurs whenever strands work against each other under load.
- External abrasion – Occurs when the cable bends around the winch drum or against the side of the drum.
Every time the boat is raised or lowered, there is internal wear on the cable. Each strand of wire in the winding is moving at a slightly different speed. Abrasion of the cable strands is the result. When the strands break, they lose strength.
Assuming the cable is well cared for, how long should it last?
Experts say that to be safe- replace a galvanized cable every two years. All things being equal, the stainless cable will last longer. Up to 2X as long.
A point often overlooked – internal abrasion and rust are hidden, and there may be no visible damage. A boat lift cable like this will fail without prior warning.
When in doubt, plan on replacing the cables. Trying to squeeze another year out of a $75 cable isn’t worth the risk of dropping your boat or personal injury.
PWS handles Shoremaster cables and can provide new cables for all brands.
Nothing lasts forever – even boat lift cables.
Don’t Forget – Considering rip-rap for your shoreline? PWS is the place to contact!
Where is Pier & Waterfront Solutions?
Located at 7325 St. Hwy 57, it’s 3 miles south of Sturgeon Bay, and 1 mile past the intersection of Cty MM (heading north). Look on the right side, one mile north, at the next intersection (Idlewild Road and Hwy 57).
ARE WE OPEN?
During this time of uncertainty, Pier & Waterfront Solutions is staying “open.” We have implemented measures to ensure the safety of our employees and visitors. At the same time, we are working to maintain the trusted service that you have come to expect.
We are implementing these precautionary measures:
1. Conducting as much business as possible by email, text, or phone.
2. Site visits will continue but with limited in-person meetings. When in-person contacts are necessary, we will follow “social distancing” guidelines.
3. Our display yard is always open for you to examine at your leisure. All displays have a numbered, red tag on them. If you want more information or pricing, please reference that number.
Is there More?
4. Some employees will be working remotely, but they are always available by phone.
5. Any employee with symptoms or illness is sent home.
6. We continue to provide estimates and invoices by email to make the process paperless.
7. Crew starting times are being staggered to limit social interactions.
8. We keep the same crews together to limit cross interactions.
With these measures, we hope everyone will stay safe, and we will be back to normal operations soon.
What can you do to help us?
1. Please conduct as much business as possible via emails, messaging, and emails. This step protects everyone involved.
2. When you see our crews installing equipment, please practice “social distancing.”
Thank you for allowing us to work with you.
So – YES – ARE WE OPEN?
Please call, message, or email us with any questions.
Let’s all stay safe!
Contact:
Jerry @ (920) 493-4404 or Jerry@wisconsinpws.com – Commercial work & new/used Sales.
Dave @ (920) 905-2588 or Dave@wisconsinpws.com – Erosion control & shoreline work.
John @ (920) 493-4405 or John@wisconsinpws.com – Scheduling & Service work
May 7, 2020
17 STEPS TO PREPARE FOR SUMMER
Summer is almost here. Are you Ready?
Summer activities officially start with Memorial Day. In 2020 this may be delayed for many people. Even so, it’s approaching fast.
Memorial Day means a lot of outdoor activities will be starting. Many people will head to the lake for fun and relaxation. To truly enjoy the rest of the season, you have to ask yourself, “Is my place ready for summer”?
Many people have time on their hands this year, so why not use it to get ready for summer? That way, you can enjoy getting outside and have some real fun on the water.
Be Ready for Summer Activities
Here’s a quick checklist to help make sure you are ready for the season. Many people have time on your hands this year, so why not use it to get ready for summer?
Summer Startup Checklist:
- Have your air conditioner checked and serviced if needed.
- Inspect, sweep, and power wash your decking & porch. For more information – see link.
- Touch up stains and paints as needed.
- Prep your lawn. You may need to give the yard a thorough mowing.
- Rake up any leftover leaves and debris so that a lush green grass can thrive.
- Get out the rake and clean up any debris on your shore. Watch for glass and sharp objects that washed up over the winter. They can completely take the fun out of your summer.
- Clean the grill, fill the propane tanks, or stock up on charcoal and lighter fluid. You want to make sure you have everything ready for that first barbeque.
- Test all smoke and carbon monoxide detectors. Test these every six months. If you don’t have detectors or fire extinguishers, be sure to get some. Unlike living in the city, many lakefront communities have only volunteer fire departments. Response times may not be as quick as in the city, and fire only needs time to get totally out of control.
WHAT ELSE NEEDS TO BE DONE?
- If the furnace has not been operating over the winter, now is an excellent time to make sure it is working correctly. You’ll need it for those early morning chills.
- Look over the screens on the windows and doors. Repair any holes or replace them as needed. No one wants to leave an invitation for the bugs to enter the house.
- Clean your boat and PWC and any other “toys.” Check all fluid levels, inspect the hull, test electronics, give it a thorough cleaning.
- Check all anchor ropes. Are they cut or rotting?
- Be sure to check the trailer and lights. Nothing is more aggravating than following a vehicle with faulty lights.
- Have you checked the batteries? Is it time for a new one?
- Be sure to stock the cabinets. Are there snacks, hamburgers, chips, hot dogs, buns, along with beverages and lots of s’mores. They’re great for outdoor grills and campfires.
- Plant new flowers to add more beauty and color to your yard.
- Check your dock and the cables on your jet ski and boat lifts. Have them changed before they go into the water. For more information, follow this link; and
Most important of all …ENJOY A SAFE SUMMER!
Tell Your Friends & Family
Have friends or neighbors you believe should see this article? Email them this link – and Thank you!
Where is Pier & Waterfront Solutions?
Located at 7325 St. Hwy 57, it’s 3 miles south of Sturgeon Bay, and 1 mile past the intersection of Cty MM (heading north). Look on the right side, one mile north, at the next intersection (Idlewild Road and Hwy 57).
ARE WE OPEN?
During this time of uncertainty, Pier & Waterfront Solutions is staying “open.” We have implemented measures to ensure the safety of our employees and visitors. At the same time, we are working to maintain the trusted service that you have come to expect.
We are implementing these precautionary measures:
1. Conducting as much business as possible by email, text, or phone.
2. Site visits will continue but with limited in-person meetings. When in-person contacts are necessary, we will follow “social distancing” guidelines.
3. Our display yard is always open for you to examine at your leisure. All displays have a numbered, red tag on them. If you want more information or pricing, please reference that number.
Is there More?
4. Some employees will be working remotely, but they are always available by phone.
5. Any employee with symptoms or illness is sent home.
6. We continue to provide estimates and invoices by email to make the process paperless.
7. Crew starting times are being staggered to limit social interactions.
8. We keep the same crews together to limit cross interactions.
With these measures, we hope everyone will stay safe, and we will be back to normal operations soon.
What can you do to help us?
1. Please conduct as much business as possible via emails, messaging, and emails. This step protects everyone involved.
2. When you see our crews installing equipment, please practice “social distancing.”
Thank you for allowing us to work with you.
So – YES – WE ARE OPEN?
Please call, message, or email us with any questions.
Let’s all stay safe!
Contact:
Jerry @ (920) 493-4404 or Jerry@wisconsinpws.com – Commercial work & new/used Sales.
Dave @ (920) 905-2588 or Dave@wisconsinpws.com – Erosion control & shoreline work.
John @ (920) 493-4405 or John@wisconsinpws.com – Scheduling & Service work
May 5, 2020
Sturgeon Bay business installs Rip-Rap
Pier & Waterfront Solutions has expanded its Sturgeon Bay rip-rap business to handle the increased installation demand on Lake Michigan and the Bay of Green Bay. Installing rip-rap has prevented further destruction due to the high water levels. Pier & Waterfront Solutions has kept its excavators working through the winter to meet the demand.
PWS Co-owner, Dave Kalista, has been coordinating the work for the last two years. Dave recently reported that “As the waters continue to rise, the demand has risen with it. We recently added another excavator to handle the demand.” Dave went on to say, “With the additional excavator, we can better serve our customers in a timely fashion.”
As of Jan. 2020, local waters in Sturgeon Bay and the whole of the Door County Peninsula have risen 39,” year-to-year. 39″ exceeds records set back in 1986. Some experts predict water levels will increase by an additional 20″ by the end of summer.
Rip-rap could prevent this.
As a result, beaches are eroding at an alarming rate. The erosion is due to record-setting water levels and intense storms. Typical damage includes eroded beaches, lawns, and uprooted trees and vegetation.
How can you protect your Property?
Experts agree – rip-rap and seawalls are the best methods to protect against erosion. Of the choices, rip-rap is the least costly by far.
Contact Dave at (920) 905-2588 for more information.
Where is Pier & Waterfront Solutions?
Located at 7325 St. Hwy 57, it’s 3 miles south of Sturgeon Bay, and 1 mile past the intersection of Cty MM (heading north). Look on the right side, one mile north, at the next intersection (Idlewild Road and Hwy 57).
ARE WE OPEN?
During this time of uncertainty, Pier & Waterfront Solutions is staying “open.” We have implemented measures to ensure the safety of our employees and visitors. At the same time, we are working to maintain the trusted service that you have come to expect.
We are implementing these precautionary measures:
1. Conducting as much business as possible by email, text, or phone.
2. Site visits will continue but with limited in-person meetings. When in-person contacts are necessary, we will follow “social distancing” guidelines.
3. Our display yard is always open for you to examine at your leisure. All displays have a numbered, red tag on them. If you want more information or pricing, please reference that number.
Is there More?
4. Some employees will be working remotely, but they are always available by phone.
5. Any employee with symptoms or illness is sent home.
6. We continue to provide estimates and invoices by email to make the process paperless.
7. Crew starting times are being staggered to limit social interactions.
8. We keep the same crews together to limit cross interactions.
With these measures, we hope everyone will stay safe, and we will be back to normal operations soon.
What can you do to help us?
1. Please conduct as much business as possible via emails, messaging, and emails. This step protects everyone involved.
2. When you see our crews installing equipment, please practice “social distancing.”
Thank you for allowing us to work with you.
So – YES – ARE WE OPEN?
Please call, message, or email us with any questions.
Let’s all stay safe!
Contact:
Jerry @ (920) 493-4404 or Jerry@wisconsinpws.com – Commercial work & new/used Sales.
Dave @ (920) 905-2588 or Dave@wisconsinpws.com – Erosion control & shoreline work.
John @ (920) 493-4405 or John@wisconsinpws.com – Scheduling & Service work
Apr 28, 2020
3 REASONS FOR A SHORTER DOCK
The high water again this year means that your dock and boat lift will once again be taking a beating. (see article)
Last year, some people insisted on putting their entire dock in. Additionally, they wanted their boat lifts at the end of the dock. We advised against this, and we will be asking again this year. Why do we recommend this?
THE LEGAL REASON
First, the Legal reason – the DNR restricts a dock from being in water depths deeper than necessary to float a boat. In the past, in some areas, this meant a dock could be 200′ long (with warning lights to alert boaters in the dark).
Even that 200′ dock was legal as long as it did not obstruct boat traffic. If the water levels were shallow, you had to go that far out to launch a boat in some areas.
Today, that same dock could be closer to 100′ (or less) due to the extremely high water.
NOW – THE PRACTICAL REASON
Second, the reason for a shorter dock this year is simple – The water is EVEN HIGHER this year. There is a better chance that your dock and boat will survive the storms.
NEXT, THE FINANCIAL REASON
Finally, do you want to save money as well as reduce the risk of damage to your dock & boat lifts? The cost of installation depends, among other things, on the actual time it takes to install your equipment. Often, fewer sections equate to lower costs.
What’s the alternative to a shorter dock?
Without your agreement, we had to install the full length. If you didn’t agree, we felt we had no choice but to replace the legs with longer legs. We had to do this to compensate for the higher water. But, this route results in higher costs for installation.
Some homeowners took us up on the shorter docks in the hope that the water would go down in 2020. It didn’t! Others opted for lengthening the legs.
From our standpoint, it requires more time to replace the legs with longer ones than to shorten the dock.
So – What Happened?
Some docks did not have longer legs put on, and we installed the entire length. Still, they survived. If this was your dock, feel fortunate.
For those who did NOT allow us to do one of these alternatives, we will be asking you to choose again this year. Remember, the water is even higher this year.
We would prefer to leave one or two sections uninstalled this year. The alternative, we will request that you allow us to put longer legs on your dock. Our goal is simple – we want to limit damage to your dock.
Also remember, with longer legs, your dock may have more “sway” to it. If that happens, we recommend sway braces.
Even with longer legs, we will ask you to move your boat, and jet ski lifts closer to the shore. This will help protect them from the waves. The lifts have limited leg lengths (without getting longer legs). Your boat could pay the price if we don’t use one of these alternatives.
NEW – this year!
This year PWS has another alternative that was not available in the past. Talk to Jerry about trading your dock for the new 3-Season Pier, which we are now offering.
This new steel dock can handle storms better due to it’s greater weight and the “open” decking we use. Combining these two features makes it the heaviest pier on Green Bay. It has survived installations on Lake Michigan also.
Tell Your Friends & Family
Have friends or neighbors you believe should see this article? Email them this link – and Thank you!
Don’t Forget – Considering rip-rap for your shoreline? PWS is the place to contact!
PWS is open for business as usual. Practicing “Social Distancing”? We do business by phone and emails also.
Where is Pier & Waterfront Solutions?
Located at 7325 St. Hwy 57, it’s 3 miles south of Sturgeon Bay, and 1 mile past the intersection of Cty MM (heading north). Look on the right side, one mile north, at the next intersection (Idlewild Road and Hwy 57).
ARE WE OPEN?
During this time of uncertainty, Pier & Waterfront Solutions is staying “open.” We have implemented measures to ensure the safety of our employees and visitors. At the same time, we are working to maintain the trusted service that you have come to expect.
We are implementing these precautionary measures:
1. Conducting as much business as possible by email, text, or phone.
2. Site visits will continue but with limited in-person meetings. When in-person contacts are necessary, we will follow “social distancing” guidelines.
3. Our display yard is always open for you to examine at your leisure. All displays have a numbered, red tag on them. If you want more information or pricing, please reference that number.
Is there More?
4. Some employees will be working remotely, but they are always available by phone.
5. Any employee with symptoms or illness is sent home.
6. We continue to provide estimates and invoices by email to make the process paperless.
7. Crew starting times are being staggered to limit social interactions.
8. We keep the same crews together to limit cross interactions.
With these measures, we hope everyone will stay safe, and we will be back to normal operations soon.
What can you do to help us?
1. Please conduct as much business as possible via emails, messaging, and emails. This step protects everyone involved.
2. When you see our crews installing equipment, please practice “social distancing.”
Thank you for allowing us to work with you.
So – YES – ARE WE OPEN?
Please call, message, or email us with any questions.
Let’s all stay safe!
Contact:
Jerry @ (920) 493-4404 or Jerry@wisconsinpws.com – Commercial work & new/used Sales.
Dave @ (920) 905-2588 or Dave@wisconsinpws.com – Erosion control & shoreline work.
John @ (920) 493-4405 or John@wisconsinpws.com – Scheduling & Service work
